Samsung Jet Bot Combo LED status indicator
The LED status indicators on your Samsung Jet Bot Combo and Clean Station will let you know when the Jet Bot Combo is charging or has a low battery, or when the Clean Station requires maintenance. You can review our guide to learn more about the various LED meanings.
Notes:
- During the first 20 minutes of charging, the LED status indicator will turn red.
- If the battery has been completely depleted before charging begins, the LED status indicator will turn red and blink for about 20 minutes.
- The Jet Bot Combo’s night mode (18:00 to 06:00) operates only when the Jet Bot Combo is charging. In night mode, the Jet Bot Combo’s LED brightness is adjusted to 20% within the set time when using a phone.
You can refer to the following information to learn about your Jet Bot Combo’s LED status indicator.
While operating
- Blinking red without moving: An error has occurred.
- Blinking red while moving: The Jet Bot Combo is returning to the Clean Station due to a low battery.
- Solid red: The Jet Bot Combo has a low battery.
While charging
- Solid red, orange, or yellow: The Jet Bot Combo is charging.
- Solid green: Charging is complete.
- Solid violet: A software update is in progress.
You can refer to the following information to learn about the Clean Station’s LED status indicator.
- Solid white for 5 seconds: The Clean Station is turned on.
- Solid white: The Empty Dust function is on, the Jet Bot Combo is charging (1 minute after it has been turned off), or the Clean Station is cleaning and drying the Mops.
- Blinking red: The Fine Dust Filter requires cleaning or the Dustbin lid is open.
- Solid red: The Dust Bag or Waste Water Tank is full, the Clean Water Tank inside the Clean Station is empty, or the Clean Water Tank, Waste Water Tank, or Washboard has not been installed correctly.
Note: For any further questions, Contact us.
Thank you for your feedback!
Please answer all questions.