Setting Up the Samsung Clean Station

Last Update date : 2023-05-07

The Samsung Clean Station™ conveniently empties your Jet™ canister without the hassle of getting your hands dirty and safely contains the vacuum dust from scattering back into the air. Best of all, you can set up the Clean Station™ anywhere you like. With the stylish design, it can fit in with just about any of the decor.

There are some requirements when setting up the Clean Station™ to help maximise and maintain its cleaning efficiency. Below is a guide to help you set up your Clean Station™.

Note: 

  • For more information on emptying your Clean Station™, please click here.
  • If you would like to know how to replace the dust bag of your Clean Station™, please click here
  • For more information on maintaining your Jet™ product, please click here.
1 Place the Clean Station™ on level ground.
Place Clean Station on level ground.
2 Ensure that the product is not placed on carpet or rugs.
Clean Station on top of carpet with a red cross.
3 On the base of the product, place the power cord into the power port.
Plug in power cord
4 Insert the cord in the groove on the base of the Clean Station™. If the cord is not placed within the groove, the power cable can get damaged over time and the Clean Station™ will not be sitting on even ground.
Shape of the power cord guide.
5 Place the product 10cm out from the wall. Having the Clean Station™ right up against the wall will block the air filter on the back of the product.
10 centimetre distance from the wall.
6 Plug the power cord into a power outlet and power on. A blue light will indicate that the product is ready to use.
Plug in power cord and blue light will show on Clean Station
Place Clean Station on level ground.
1 Run the power cord of the Clean Station™ along the round groove at the bottom.
- Make sure the power cord is correctly placed so that the Clean Station™ stands without tilting.
2 Before plugging in the Clean Station™, arrange the power cord neatly.
2 When plugging in the Clean Station™, the START/STOP button turns blue for 5 seconds and goes off.
Place Clean Station on level ground.
1 Connect the provided power cord to the bottom of the Clean Station™.
Place Clean Station on level ground.
2 Position the power cord into the fixing groove at the rear of the Clean Station™.
Place Clean Station on level ground.
3 Place the Clean Station™ on an even floor and near an electrical outlet and plug it in.
- When the Clean Station™ is plugged in, the Status Indicator at the top of the Clean Station™ turns white for a short time.
Place Clean Station on level ground.

Note: For further assistance or questions, please Contact us.

Thank you for your feedback!