How to use your Samsung Jet Stick Vacuum

Last Update date : Jun 04. 2024
Samsung Jet Stick Vacuum standing upright on a shiny tiled floor next to a charging station, with a minimalist living room featuring a beige sofa in the background.

Meet your new cleaning companion—the Samsung Jet Stick Vacuum. More than just a vacuum, the Jet Stick incorporates advanced technology to make cleaning your home a breeze. The charging stand not only recharges the battery but also offers a convenient and tidy storage solution for the vacuum and its attachments. This guide will walk you through the setup process and get you started on cleaning in no time.

Note: For comprehensive details on your vacuum's features and operations, please consult the user manual.

The charging stand is the core of your Jet Stick experience. Here’s how to get it up and running:

1 Assemble the Stand: Begin by attaching the vacuum’s standpipe to the bottom support. Ensure that the standpipe is pushed in firmly and the screw hole is properly aligned. Secure the pipe to the bottom support using the included small screw.
An illustration showing a hand using a screwdriver to secure a screw into the standpipe of a Samsung Jet Stick Vacuum.
2 Install the Charging Part: Next, attach the charging component to the top of the standpipe. Remember, once assembled, do not disassemble this part.
An illustration showing the charging component being attached to the top of the standpipe with a 'Click' indicating it is securely in place.
3 Connect the Power Cord: Attach the power cord to the rear of the charging stand. Hold the connection part of the cord and firmly push it onto the connection pins, ensuring the gray lines on the cord's tip are fully covered.
An illustration depicting a hand connecting the power cord to the rear of the charging stand, with a close-up showing the cord's tip fully inserted into the connection pins.
4 Organize the Power Cord: Route the power cord through the groove at the bottom of the support to help conceal it. This also allows the charging stand to fit snugly against the wall.
An illustration depicting a hand guiding the power cord through a groove at the bottom of the charging stand, ensuring a tidy and snug fit against the wall.
5 Charge the Battery: If it’s your first time using the Jet Stick, place the battery into the charging stand to power up.
An illustration depicting the insertion of a battery into the charging stand of a Samsung Jet Stick Vacuum, with an inset showing the battery level indicator illuminating to indicate charging progress.
6 Battery Management: Once the battery is fully charged, you can swap it with the second battery provided with your Jet Stick. This allows you to clean continuously—use one battery while the other charges.

With the battery charged, assembling your vacuum is straightforward. Follow these steps to quickly put together your Samsung Jet Stick and start cleaning:

1 Insert the Battery: Slide the battery into its compartment located behind the dustbin, just above the small silver pipe.
An illustration depicting the insertion of a battery into the back of a Samsung Jet Stick Vacuum, highlighted by a 'Click' to indicate the battery is securely in place.
2 Connect the Pipes: Insert the long silver pipe into the smaller silver pipe at the bottom of the dustbin.
An illustration of a long silver pipe designed to be connected to a vacuum, featuring a smaller attachment point at the base for easy insertion.
3 Attach the Brush Head: Connect the long silver pipe to your chosen brush head, such as the Soft Action Brush or the Wet Brush.
An illustration showing the long silver pipe being connected to a Samsung Jet Stick Vacuum brush head, with a 'Click' indicating the pieces are securely locked together.
4 Assemble the Brush Holder: Attach the brush holder to the front of the vacuum’s dustbin. Following this, attach any additional accessories as needed.
An illustration of a vacuum brush holder, designed to attach to the front of a vacuum’s dustbin, featuring multiple slots for various accessories.

Note: The battery will slowly discharge when not in use or charging.

Once you have your charging stand or station set up, it’s easy to keep your vacuum's battery powered up. Just place the vacuum on the stand or station, ensuring it’s connected to a power source.

A person placing a Samsung Jet Stick Vacuum onto a wall-mounted charging stand, demonstrating the ease of keeping the device powered and ready for use.

Charging Process: The battery level indicator will blink during charging. Once fully charged, the blinking will cease, and the indicator light will dim. To preserve battery lifespan, especially if not using the vacuum for an extended period, unplug the charging stand or station and detach the battery.

Ensure your Bespoke Jet Cordless Stick Vacuum is always ready to go by effectively managing its battery life. Your vacuum comes equipped with two batteries, allowing you to swap them as needed to extend cleaning time.

1 Power Down: Turn off the vacuum by pressing the Power button on the control panel.
2 Release the Battery: Press the Battery release button at the bottom of the vacuum’s handle to eject the battery.
3 Charge the Battery: Place the battery into the charging slot on the Accessory Cradle. Ensure it's firmly seated within the slot.
A Samsung Jet Stick Vacuum stands on a circular base on the right, showcasing its sleek blue design. On the left, an accessory stand holds various attachments, emphasizing utility and organization.
4 Monitor the Charge: Observe the charging process via the control panel. It typically takes about 3.5 hours to fully charge.
5 Reinstall the Battery: Once charged, remove the battery from the cradle and reinsert it into the vacuum’s handle.

Tips for Battery Maintenance

If you're uncertain whether the battery needs to be charged, simply check the battery level indicator on top of the vacuum's handle. The display will read "Low Battery" and turn red when recharging is necessary. For a medium charge, the indicator will show orange or yellow, and it will display green when the battery is fully charged.

Close-up view of the battery level indicator on a Samsung Jet Stick Vacuum's handle, displaying a 49% charge on a digital screen with a blue lightning bolt icon. Close-up view of the battery level indicator on a Samsung Jet Stick Vacuum's handle, displaying a 49% charge on a digital screen with a blue lightning bolt icon.

Note: For additional tips and detailed instructions, refer to our complete guide or consult the user manual.

Click Here

Need More Support?

Chat With Us. Service & Support Available 24/7.

CLICK HERE

Related Questions

Thank you for your feedback!

Contact Info

Online Support

There are a number of a different ways of contacting us via Live Chat, Text, Email and more.

Chat Support: 24/7

Please note: If you are unable to access chat, please Click Here
Learn more Chat with Us

Call Support

Speak to one of our dedicated team of experts.
Mon-Sun: 9 AM – 9 PM (EST)

Call now

Face to Face Support

Service Centre Locator
to help you find nearest service centre
Click here

Sign Language Support

ASL & LSQ Sign Language Interpretation Service For Samsung Technical Support*
Learn More

Printers Support

For technical support for printers
Click here
View more

The coding for Contact US > Call > View more function. And this text is only displayed on the editor page, please do not delet this component from Support Home. Thank you