Installing Samsung Semi Automatic Washing Machine.

Environment:

1. Leave some space. Ensure there is at least 15cm of space between the washing machine and the wall.

2. Place the washing machine on a sturdy, flat surface. If the washing machine is placed on an uneven or weak surface, noise or vibration may occur. (Allowable deviation is 2°)

3. Never install the washing machine near water sources. Avoid installing the machine on an uneven or weak surface, as this may cause noise or vibration. (Allowable deviation is 2°)

4. Avoid direct sunlight or heating devices. Plastic and electrical components can be damaged by direct heat, so never place the washing machine near heaters, boilers, etc., and avoid exposing it to direct sunlight.

Connecting the drain hose:

For general types:

1. Press and hold down the joint ring, then insert it into the drain hose.

2. Insert the drain hose into the drain outlet. Make sure to connect them firmly using the joint ring.

• Push it with force further into the bottom of the drain outlet.
• Check the drain hose for secure connection by gently pulling it to ensure it does not come apart from the outlet.

Connecting the inlet hose:

1. Use the new hose-sets provided with the appliance and do not reuse old hoses.

2. Inset one end of the inlet hose into the washing machine's inlet port.

3. Connect the other end of the inlet hose to the faucet.