When the Child Lock is activated, all buttons are disabled except for the power and icon buttons. To activate or deactivate the Child Lock.

Step 1. Tap the icon button.

Step 2. Turn the Navigation dial to select ‘Child Lock’.

Step 3. Tap O to select On or Off.

If you set the Damp Alert, the indicator will blink when the clothes inside have dried enough to be ironed.  When alerted, take out items that you wish to hang dry or iron.

Step 1. Select a cycle and change the cycle settings as necessary.

Step 2. Tap the icon.

Step 3. Turn the Navigation dial to select ‘Damp Alert’

Step 4. Tap O to set.

Step 5. Tap and hold the button to start. 

If the dryer displays the ‘Empty the tank’ message and stops operating, check the water tank. 

When it is time to clean the Heat Exchanger, the dryer will alert you by displaying the ‘Clean Heat Exchanger’ message.

If the ‘Check Heat Exchanger’ alarm continues, check the inner cover of the Heat Exchanger by opening the cover and removing it. After washing, reinsert the inner cover and make sure it is locked correctly. 

System languages can be set for your convenience.

Step 1. Tap and hold the icon button for 3 seconds. 

Step 2. Turn the Navigation dial to select Language.

Step 3. Tap O to select language.

Step 4. When you select language, tap O to set. 

You can turn on or off the alarm sound at the end of the cycle if you need. 

Step 1. Tap and hold the icon button for 3 seconds. 

Step 2. Turn the Navigation dial to select 'Alarm’.

Step 3. Tap O to select On or Off.