How do I use the heating mode on my air conditioner?

Last Update date : Oct 18. 2024

Control the temperature of your room with the air conditioner

Samsung air conditioning products can provide heating instantly. It can be used in two ways - as an air conditioner in the summer and as a heater in the winter. There is no need to purchase a separate heater and, therefore, it's economical. The heating mode on your air conditioner can create a quick warm atmosphere without waiting for a long time.

Note: The air conditioner gets heat energy from outside air and heats the room. Therefore, if the outside temperature is too low, the heating ability may decrease.

How to control the temperature with the remote controller

Step 1. Press the power button of the remote controller to turn on the air conditioner. 

press power button

Step 2. Press the Mode button to set the operation mode. Each time the Mode button is pressed, the mode changes from Auto → Cool → Dry → Fan → Heat

press mode button and change the operation mode to the heat

Step 3. After selecting the mode, set the desired temperature.

set the temperature after selecting the mode

Step 4. If necessary, set the fan speed with the buttons on the remote control.

set fan speed if necessary

Note: 

  • The actual design of the remote controller may differ from your model.
  • This image is just a sample in English but is available in the language of your country.

When the outdoor temperature is low and the humidity is high, frost may develop on the outdoor heat exchanger, which may decrease the heating efficiency. When these conditions are present while Heat mode is on, the air conditioner runs the Defrost function for 5 to 12 minutes to remove frost from the outdoor heat exchanger.

Indoor unit will display the df indicator 

When the Defrost function is on, the df indicator appears on the indoor unit display, steam is produced on the outdoor unit. Then, the air conditioner stops running to prevent cold air from coming out of the indoor unit.

indoor unit displays df indicator

Note: You cannot select other options with the remote control until the Defrost function is finished.

Thank you for your feedback!