How to install the refrigerator water supply line?
How to
Your refrigerator dispenses refreshing ice and water all year long... as long as it's connected to a water supply line. If your home doesn't have a water line installed from a previous refrigerator, you will need a water line that can run between the water pipes in your home and your fridge.
Note: New hoses supplied with the appliance should be used and old hoses should not be reused.
CAUTION
- New hoses supplied with the appliance should be used and old hoses should not be reused.
- Water line installation should only be performed by a qualified technician.
- Water pipe installation is not covered by the refrigerator warranty. Water pipe installation must be performed at your expense unless the installation fee is included in the retail price.
- Samsung is not responsible for water pipe installation. In case of water leakage, contact the water pipe installer.
To connect the cold water pipe to the water filter hose, follow these steps
CAUTION:
Make sure the water filter hose is connected to a cold, potable water pipe. If connected to a hot water pipe, the purifier may malfunction.
Step 1.
Shut off the water supply with the main valve.
A: Water main shut-off
Step 2.
Locate the cold potable water pipe (1).
B: Without space
Step 3.
Follow the water pipe installation instructions to perform the installation.
Step 4.
Once the connection is completed, open the main water valve and dispense approximately 3 liters of water. This procedure is to remove impurities from the piping.
To connect the cold water pipe to the water filter hose, follow these steps
CAUTION:
Make sure the water filter hose is connected to a cold, potable water pipe. If connected to a hot water pipe, the purifier may malfunction.
Step 1.
Loosen and remove the compression nut (a) from the chiller water pipe and insert the water filter hose.
Step 2.
Tighten the compression nut (a) to connect the water filter hose and water pipe.
Step 3.
Open the main water valve and check for leaks.
A. Unit water piping
B. Unit water pipe
Step 4.
If there are no leaks, dispense approximately 3 liters of water before using the cooler in order to remove impurities from the water filtering system.
NOTE
If you must relocate the chiller after connecting the water pipe, make sure that the pipe joint section is kept straight.
CAUTION
Do not install the water filter in any part of the cooler. This could damage the refrigerator.
Thank you for your feedback!
Please answer all questions.
Contact Info
WhatsApp - 24/7
![WhatsApp]()
![WhatsApp]()
Attention 24 hours a day
LiveChat - 24/7
![LiveChat]()
![LiveChat]()
Attention 24 hours a day