Why has the POWERbot stopped during cleaning?

Step 2. Manually charge the POWERbot by placing it on the docking station.

Make sure the charging pins on the POWERbot and the docking station are aligned.

Step 3. Check the charging status.

• Case 1: The battery indicator blinks at 1 sec. intervals during charging and the indicator will remain in the ON status when fully charged.
• Case 2: "_ _ _ _" will turn on according to charging progress and "FULL" will turn on when the charging is complete. 

If the POWERbot is stuck, jammed, or trapped in the main body while driving, or the driving wheel is lifted, it stops while displaying the notification (!).

• If the POWERbot is immobilized by an obstacle such as a cord, threshold, etc., pick the POWERbot up and move it away from the obstacle.
• If any fabric or string is caught in a drive wheel, turn off the emergency switch and remove the fabric or string before using it again.
• In the case of any small furniture with short legs, it will be recognized as a threshold, so please remove any such furniture before cleaning.