Displayed information codes on my dishwasher

• Leakage check

- Close the water supply valve. Go to your home's circuit breaker panel and set the dishwasher's circuit breaker switch to off. Then, contact the installer to repair.

• Water supply check
  

- Check if the water supply valve is closed.

- Check if the water supply is suspended.

- Check if the water inlet valve or line is frozen or clogged by foreign objects.

Drain check

- Close the water supply valve. Check if the drain hose is clogged or folded. 

- Close the water supply valve. Check if the drain hole inside the pump is clogged.

High temperature heating check

- Functional check. With the dishwasher empty, add detergent, and the run a cycle.

- If the issue continues, go to your home's circuit breaker panel, and set the dishwasher's circuit breaker switch to off. Then, please contact a Samsung service center.

Pump operation check

- Functional check. Turn off the dishwasher and restart.

Dividing valve check

- Displayed when the dividing valve is defective.

Communications between main and sub PBAs check

- Displayed when the circuit is open or the communication wiring is broken.

Button check

- Displayed by pressing any button for more than 30 seconds.

- Try to bounce the buttons with fingers. In case of a touch screen, wipe off any moisture or foreign objects with a dry towel.