How to clean the filters of BESPOKE Jet and Clean Station

Let’s start by detaching the BESPOKE Jet dustbin. Press the detachment button on the top. 

• Gently remove the dustbin.
• Pull up on the washable micro filter slowly to remove.
• Rotate the filter holder anti-clockwise to release it and detach the dustbin and Assy cyclone grille.
• Remove the dust in the Assy case.
• Rotate the fine dust filter clockwise to release it from the machine.
• Remove the dust in the fine dust filter
• Remove dust on the filters. If needed, use a vacuum to remove the dust. Be careful not to damage the filters.
• Rinse the filter under running water. All parts and filters are washable. 

• Let’s start cleaning the filters on the BESPOKE Jet Clean Station.
• BESPOKE Jet Clean Stations comes with an advanced filtration system.

1. Dust bag
2. Premotor filter
3. Fine dust filter

• When the status indicator turns red, the dust bag inside needs to be replaced.
• Remove the cover lid by slightly pushing both sides of the back cover lid.
• Press the top button to remove the inner cover lid.
• Gently pull the blue latch inside and slowly pull the Dust bag out.
• Throw the Dust bag into the trash can.
• Use the handle to lift the Premotor filter up and remove.
• Remove the Premotor filter from the filter case.
• Shake over a bin to remove dust.
• Insert the Premotor filter back into the filter case.
• Reinsert the Premotor filter back into the original position.
• Gently place the new dust bag inside and push the blue latch back in.
• Attach the back inner lid cover and attach the back lid cover.
• Rotate the filter holder clockwise and detach the Fine dust filter.
• Shake the Fine dust filter over a bin to remove dust.
• Rotate the filter holder anticlockwise and assemble the Fine dust filter.