Clean the Fine Dust Filter on your Samsung Bespoke Jet AI
Last Update date : Aug 22. 2023
Your Samsung Bespoke Jet AI vacuum includes a Fine Dust Filter, which can be emptied and cleaned. Depending on how often your vacuum is used, the Fine Dust Filter should be cleaned about once every month.
Clean the Fine Dust Filter
![A Samsung Fine Dust Filter is submerged in water to be cleaned]()
To begin cleaning the Fine Dust Filter on your Samsung Bespoke Jet AI vacuum, you’ll need to disassemble a few parts of the vacuum.
1
Lift the rubber cover on the rear side of the vacuum handle, and then remove its screw using a flat-head screwdriver.
![A flat-head screwdriver is used on a Samsung Bespoke Jet AI vacuum to access the Fine Dust Filter]()
2
Lift the control panel to remove it.
![The Control Panel is being removed from a Samsung Bespoke Jet AI vacuum]()
3
Turn the Fine Dust Filter counterclockwise to unlock it, and then remove it.
![The Fine Dust Filter is being removed from a Samsung Bespoke Jet AI vacuum]()
4
Empty the filter and rinse it with water. Allow it to dry completely in a shaded area for more than 24 hours.
![The Fine Dust Filter is being cleaned and dried]()
Note: Using the filter before it has dried may cause odors.
5
Then, reassemble the filter by inserting it into the handle and turning it clockwise.
![The Fine Dust Filter is being put back into a Samsung Bespoke Jet AI vacuum]()
6
Replace the control panel and the rubber cover.
![The Control Panel is being put back into a Samsung Bespoke Jet AI vacuum]()
Thank you for your feedback!
Please answer all questions.