How to use the Smart Switch app to transfer data between Galaxy devices

Last Update date : Mar 12. 2024

Every now and then, unfortunate events happen, and data saved on phones and tablets is lost. However, if that same data was backed up beforehand, it can be restored. The Samsung Smart Switch app can assist you.

Two Galaxy phones connected by a USB cable

Note: If this is your first time using Smart Switch to upload or restore data, the app may require some permissions from you. Follow these instructions to complete the permissions requirement:

  • Step 1. On the screen labelled Samsung Smart Switch, either scroll to the bottom or tap More, and then tap Continue.
  • Step 2. On the screen labelled Samsung Smart Switch uses these permissions, either scroll to the bottom or tap More, and then tap Allow.

One method of backing up and restoring your data is through the Smart Switch app and an SD card. Be aware that some phones do not have SD card slots, so you will require a compatible USB cable and SD card adapter.

Notes:

  • When backing up the SD card, delete the previously backed up data with the Smart Switch SD card and keep only the most recent date as backup data.
  • Make sure your phone is charged since data transfers may take a while.
  • The SD card and SD card adapter are not included with the phone and must be purchased separately.

Step 1. Insert the SD card into the SD card adapter.

Step 2. Insert the USB cable with the SD card adapter into your Galaxy phone.

Samsung apps home screen Samsung apps home screen

Step 3. Open the Smart Switch app on your Galaxy phone.

Samsung Switch transfer you data screen Samsung Switch transfer you data screen

Step 4. Tap the SD card icon.

Backup and restore screen Backup and restore screen

Step 5. Go to the Back up to section or the Restore from section > select USB storage.

Select data to back up or restore on Smart Switch Select data to back up or restore on Smart Switch

Step 6. Select what data you wish to back up or restore > tap Next > OK.

Backup results screen Backup results screen

Step 7. If you are backing up data, wait until the process is complete and tap Next. If you are restoring data, you can either select Go to the Home screen or wait until the Backup results screen appears and select Next.

All set screen on Smart Switch All set screen on Smart Switch

Step 8. Tap Done.

Another method for transferring data between devices is by using the Smart Switch app and a compatible USB cable.

Image showing how to connect two Galaxy phones by USB cable Image showing how to connect two Galaxy phones by USB cable
Image showing how to connect two Galaxy phones by USB cable and a port adapter Image showing how to connect two Galaxy phones by USB cable and a port adapter

Step 1. Connect your Galaxy phone (Old device) to another Galaxy phone or tablet (new device) using your phone’s USB cable. A USB adapter may be needed depending on the model version of your phone and the other Galaxy device.

Galaxy phone with a pop up window asking which app you want to use for the USB device Galaxy phone with a pop up window asking which app you want to use for the USB device

Step 2. When a pop up window appears on one of the devices, select Smart Switch.

Transfer data screen with options to either send or receive data. Transfer data screen with options to either send or receive data.

Step 3. Select Send data on the old device and select Receive data on the new device.

Note: If you select Send data, then a pop up window will appear on the other device. Select Smart Switch > Receive data or Send data.

From here, Old device refers to the device that transfers data to New device.

Pop up window asking you want Smart Switch to handle the device connection Pop up window asking you want Smart Switch to handle the device connection

Step 4. On your old device, tap Connect.

Screen requesting what data you would like to transfer Screen requesting what data you would like to transfer

Step 5. On your new device, select the data you wish to transfer > tap next.

""

Note: If your new device is not already signed into your Google account, your old device will display a screen asking if you want to copy your accounts to your new device. Select Copy and follow the onscreen instructions. You can also select Skip on your new device to bypass copying your accounts.

Screen showing the data transfer results Screen showing the data transfer results

Step 6. Once all your data transfers, tap Next on your new device.

Transfer completion screen Transfer completion screen

Step 7. Tap Done on both Galaxy devices.

Note: Some apps will appear faded and may not launch until the data transfer and installation are complete.

If you prefer a data transfer method that does not require external accessories, you can initiate a wireless data transfer through the Smart Switch app.

Samsung app home screen Samsung app home screen

Step 1. Open the Smart Switch app on the Galaxy phone you wish to back up (your old device) > select Send data.

Screen requesting if you wish to connect by USB cable or Wireless Screen requesting if you wish to connect by USB cable or Wireless

Step 2. Select Wireless. Your phone will automatically start searching for any nearby devices using high frequency audio.

Note: Both devices must be connected to the same Wi-Fi network.

Screen requesting permission to receive files Screen requesting permission to receive files

Step 3. When a pop up window appears on the second Galaxy device (your new device), select Yes.

Screen requesting permission for devices to connect Screen requesting permission for devices to connect

Step 4. On your old device, select Connect so the two Galaxy devices can connect.

Screen with options of which data to transfer Screen with options of which data to transfer

Step 5. On your new device, select which data to transfer and tap Next.

Note: If your new device is not already signed into your Google account, your old device will display a screen asking if you want to copy your accounts to your new device. Select Copy and follow the onscreen instructions. You can also select Skip on your new device to bypass copying your accounts.

Screen showing the data transfer results Screen showing the data transfer results

Step 6. Tap Next on your new device.

File transfer completion screens File transfer completion screens

Step 7. Tap Done on both Galaxy devices.

Note: Some apps will appear faded and may not launch until the data transfer and installation are complete.

After installing the Smart Switch PC program on your PC, you can back up and restore data at any time you want by connecting to the Galaxy device.

Transfer data between your phone and a computer. You must download the Smart Switch computer version app from 117.p.syniva.es/sa_en/apps/smart-switch. Backup data from your previous phone to a computer and import the data to your phone.

Step 1. On the computer, download and launch Smart Switch.

Note: If your previous phone is not a Samsung phone, back up data to a computer using a program provided by the device’s manufacturer. Then, skip to the fourth step.

Step 2. Connect your previous phone to the computer using the phone’s USB cable.

Step 3. On the computer, follow the on-screen instructions to back up data from the phone. Then, disconnect your previous phone from the computer.

Step 4. Connect your phone to the computer using the USB cable.

Step 5. On the computer, follow the on-screen instructions to transfer data to your phone.

Note: Please refer to this article if you want to learn how to use the Samsung Cloud to back up and restore your Galaxy device’s data.

Thank you for your feedback!