Galaxy Gear S- How to charge the battery?

 Use the charger to charge the battery before using it for the first time.

A computer can be also used to charge the Gear by connecting them

via the USB cable.

Use only Samsung-approved chargers, batteries, and cables.

Unapproved chargers or cables can cause the battery to explode or

damage the Gear S.

NOTE:

- If the battery is completely discharged, the Gear cannot be turned on

immediately when the charger is connected. Allow a depleted battery to

charge for a few minutes before turning on the Gear.

-The charging dock provided with the Gear is used for charging the

Gear’s battery. Take care not to lose the dock.

-Before charging the battery ensure that the charging terminals of the

Gear and the charging dock are free of foreign material, such as sweat,

liquid, or dust. Clean the charging terminals with a soft dry cloth.

1. Confirm the location of the charging terminals on the Gear and the charging dock.

2. Connect the Gear to the charging dock with the charging terminals facing each other.

3. Plug the USB cable into the multipurpose jack of the charging dock.

4. Connect the USB cable to the USB power adaptor and plug it into an electric socket.

Connecting the charger improperly may cause serious damage to the Gear. Any

damage caused by misuse is not covered by the warranty.

• While charging, some features are not available.

• If the Gear receives an unstable power supply while charging, the touch screen may

not function. If this happens, unplug the charger from the Gear.

• While charging, the Gear may heat up. This is normal and should not affect the

Gear’s lifespan or performance. If the battery gets hotter than usual, the charger

may stop charging.

• If the Gear is not charging properly, contact to a Samsung Service Centre.

After fully charging, disconnect the Gear from the charging dock. Then, disconnect

 the charging dock from the USB cable and unplug the USB power adapter from the

electric socket.