Features

Intelligent all-in-one cleaning with steam sanitisation

All-in-One Clean Station Steam+ with Steam Sanitisation

Previous

Jet Bot Combo Steam is at the Clean Station Steam+ and its mops are automatically being cleaned. Bacteria on the mops disappear as the steam eliminates harmful germs. There are five features: High Temperature Washing, Steam Sanitization, Hot Air Drying, Auto Dust Emptying, and Auto Refill.

Jet Bot Combo Steam is at the Clean Station Steam+ and its mops are automatically being cleaned. Bacteria on the mops disappear as the steam eliminates harmful germs. There are five features: High Temperature Washing, Steam Sanitization, Hot Air Drying, Auto Dust Emptying, and Auto Refill.

Easy & hygienic maintenance of the mops

All-in-One Clean Station Steam+ with Steam Sanitization

Clean effectively and hygienically – effortlessly! The Clean Station Steam+ automatically washes mops at high temperature(1) with steam and water, sanitises them with steam(2) and dries them with 55°C hot air(3). It also empties the dust bag, refills the water tank and recharges the battery.

1. The measured temperature of the steam and water mixture ranges from 50 to 60°C. 2. The measured temperature of the steam is 100°C. 3. The measured temperature of the hot air ranges from 50 to 60℃.

The dual mop pads spin and wash with high-temperature steam. Water from the tank circulates through the mops, collecting dirt before being vacuumed into another tank.

The dual mop pads spin and wash with high-temperature steam. Water from the tank circulates through the mops, collecting dirt before being vacuumed into another tank.

Keeps the mop pads thoroughly clean

High Temperature Washing

Ensure that your mop pads are always thoroughly clean and ready to use. You can set the robot to return to the Clean Station Steam+ at a specific time or after cleaning a particular space. Then it washes the mop pads at high temperature with steam and water, which removes stubborn dirt.

* The measured temperature of the steam and water mixture ranges from 50 to 60°C.

The Clean Station Steam+ sprays high-temperature steam onto the dual mop pads and spins them. Bacteria on the mops disappear as the steam eliminates harmful germs.

The Clean Station Steam+ sprays high-temperature steam onto the dual mop pads and spins them. Bacteria on the mops disappear as the steam eliminates harmful germs.

Sanitises your mop pads with hot steam

Steam Sanitization

Keep the mop pads hygienic and odour free with the Steam Sanitisation feature. When the robot vacuum returns to the Clean Station Steam+ after mopping, high-temperature steam is sprayed onto the mop pads. It reduces up to 99.99% of harmful bacteria(1) to keep them sanitary and reduce unpleasant odours.

1. Based on testing by Intertek using Wash the Mop course, eliminates 99.99% of Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Not supported in the USA. Results may vary depending on the actual usage conditions.

The Clean Station Steam+ circulates hot air around the wet dual mop pads and cleaning plate and dry them.

The Clean Station Steam+ circulates hot air around the wet dual mop pads and cleaning plate and dry them.

Dry mop pads easily and thoroughly

Hot Air Drying

Dry your mop pads thoroughly using the Hot Air Drying function. After the robot vacuum finishes mopping, it uses hot air of 55°C* to dry the wet mop and cleaning plate. Within 2 hours, it reduces the residual moisture level of the mop pad down to below 5%**, so they are ready to use.

* The measured temperature of the hot air ranges from 50 to 60°C.** Based on internal testing. Calculated by measuring and comparing the weight of the washed mop pads before and after drying for 120 minutes. Results may vary depending on the actual usage conditions.

The Clean Station Steam+ uses air pulse technology to suck dust from the Jet Bot Combo Steam's dustbin and transfer it through the station's pipe into its own collection container.

The Clean Station Steam+ uses air pulse technology to suck dust from the Jet Bot Combo Steam's dustbin and transfer it through the station's pipe into its own collection container.

Simply more hygienic dust removal

Auto Dust Emptying

Enjoy a convenient and hygienic way of emptying your dustbin every 2-3 months*. After cleaning or when the dustbin gets full, the robot returns to the Clean Station Steam+, which removes dust** using “Air Pulse” technology. And a multi-layered Filtration system traps 99.999% of fine dust***.

* May vary depending on the amount of dust in actual home environments.** Results may vary depending on individual use. Dust and hair stuck inside the grille may not be removed with a single cycle.*** Based on internal testing, using Max mode, in accordance with the IEC62885-2 5.14 standard. Results may vary depending on the actual home conditions.

The Clean Station Steam+ automatically refills the water in the Jet Bot Combo Steam from its water tank.

The Clean Station Steam+ automatically refills the water in the Jet Bot Combo Steam from its water tank.

Non-stop mopping with enough water

Auto Refill

Keep mopping without running out of water using the Auto Refill function. During cleaning, if the water tank in the robot vacuum cleaner becomes empty, it detects it and returns to the Clean Station Steam+ to automatically refill it. So it always has enough clean water to mop your whole home.

Next

stop

ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator

All-in-One Clean Station Steam+ with Intensive Steam Cleaning

Previous

Jet Bot Combo Steam is at the Clean Station Steam+ and its mops are automatically being cleaned. There are five features: High Temperature Washing, Intensive Steam Cleaning, Hot Air Drying, Auto Dust Emptying, and Auto Refill.

Jet Bot Combo Steam is at the Clean Station Steam+ and its mops are automatically being cleaned. There are five features: High Temperature Washing, Intensive Steam Cleaning, Hot Air Drying, Auto Dust Emptying, and Auto Refill.

Easy & hygienic maintenance of the mops

All-in-One Clean Station Steam+ with Intensive Steam Cleaning

Clean effectively and hygienically – effortlessly! The Clean Station Steam+ automatically washes mops at high temperature(1) with steam and water, sanitises them with steam(2) and dries them with 55°C hot air(3). It also empties the dust bag, refills the water tank and recharges the battery.

1. The measured temperature of the steam and water mixture ranges from 50 to 60°C. 2. The measured temperature of the steam is 100°C. 3. The measured temperature of the hot air ranges from 50 to 60℃.

The Clean Station Steam+ sprays high-temperature steam onto the dual mop pads and spins them.

The Clean Station Steam+ sprays high-temperature steam onto the dual mop pads and spins them.

Sanitises your mop pads with hot steam

Intensive Steam Cleaning

Keep the mop pads hygienic and odour free with the Steam Sanitisation feature. When the robot vacuum returns to the Clean Station Steam+ after mopping, high-temperature steam is sprayed onto the mop pads. It reduces up to 99.99% of harmful bacteria(1) to keep them sanitary and reduce unpleasant odours.

* The measured temperature of the steam is 100°C.

Next

stop

ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator

Outstanding Cleaning Performance

Previous

Powerful dual pads clean effectively

Powerful Spinning Mop

Ensure floors are cleaned thoroughly with enhanced mopping. Jet Bot Combo AI’s powerful dual rotating mop pads spin rapidly at 170rpm for deep cleaning. It removes the general dirt of daily living and actively scrubs away the toughest stains.

Advanced technology for high performance

Powerful Vacuum Cleaning

Clean your home effectively with advanced cleaning technologies. Dual rotating mop pads spin rapidly at 170rpm for deep cleaning. A Digital Inverter motor creates powerful suction, while a new high-efficiency brush with hair grinder removes hairs that can get tangled on the brush effectively(1).

1. Based on internal testing. Results may vary depending on actual usage conditions.

Easily pick-up hairs without tangling

New High-efficiency Brush with Hair Grinder

Remove hairs, including pet hair, on carpets and floors effectively(1). A newly designed High-efficiency Brush includes Samsung’s patented Hair Grinder. It collects hair in the centre and then cuts it up finely, so it can be sucked out easily, which prevents tangles and makes maintenance easier.

1. Based on internal testing. Comparing the hair removal, pet hair entanglement and suction performance it offers an 880% improvement compared to a brush without a hair grinder: after being used for 30 minutes, there is 0.44g less hair on the brush with the hair grinder compared to 0.05g less hair on the brush without the hair grinder. Results may vary depending on actual usage conditions.

Next

stop

ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator

4 Different Cleaning Modes

Previous

A flexible choice of cleaning methods

Vacuum and Mop Together

Adjust how Jet Bot Combo AI cleans to suit your needs. Simply choose from 4 modes on the SmartThings App(1). For fast cleaning, use the Vacuum and Mop Together mode. If you want hygienic and thorough cleaning, select the Mopping after Vacuuming mode. Or just use the Vacuum-only or Mop-only modes.

1. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

A flexible choice of cleaning methods

Mopping after Vacuuming

Adjust how Jet Bot Combo AI cleans to suit your needs. Simply choose from 4 modes on the SmartThings App(1). For fast cleaning, use the Vacuum and Mop Together mode. If you want hygienic and thorough cleaning, select the Mopping after Vacuuming mode. Or just use the Vacuum-only or Mop-only modes.

1. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Delivers a powerful cleaning performance

Powerful Vacuum cleaning

Clean your home effectively with powerful suction. Jet Bot Combo AI’s highly efficient Digital Inverter motor generates powerful suction, so it can easily suck up hair, dirt and fine dust particles on the floor. The Digital Inverter motor creates enhanced torque, which enables it to deliver intensive cleaning. It also means that it works quietly, energy efficiently and for a long time.

A flexible choice of cleaning methods

Mop Only Cleaning

Adjust how Jet Bot Combo AI cleans to suit your needs. Simply choose from 4 modes on the SmartThings App(1). For fast cleaning, use the Vacuum and Mop Together mode. If you want hygienic and thorough cleaning, select the Mopping after Vacuuming mode. Or just use the Vacuum-only or Mop-only modes.

1. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Next

stop

ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator

App Control

Previous

Virtually map your home

Flexible and efficient cleaning control

Clean your home efficiently and thoroughly. Using the SmartThings App(1) you can choose from 4 cleaning modes and view a detailed 3D map of your home. You can select the suction power and cleaning intensity, create “no-go zones” and virtual walls and specify where to vacuum, mop or keep dry.

1. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Quadruple mapping for fast-track cleaning

Smartly map your whole home

Ensure that your home is cleaned efficiently and thoroughly by mapping its entire layout. The Create Additional Map function(1) lets you draw and save maps of many spaces. If Jet Bot Combo AI is moved, the LiDAR sensor identifies its location(2) and it automatically recognises the correct map.

1. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and Samsung account are required. 2. Jet Bot Combo AI can draw and save up to 4 maps. Recognition of Jet Bot Combo AI’s location and maps may be affected by the shape of the house and the location of furniture.

Set restricted areas to prevent access

Set restricted areas

Avoid valuable furniture, certain rooms or dangerous objects by manually selecting specific locations on a map in the SmartThings App(1). You can also ensure that only part of a room is off limits using virtual walls. And you can set specific areas to mop or keep dry.

1. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Flexible and efficient cleaning control

Select & Go

Clean your home efficiently and thoroughly. Using the SmartThings App(1) you can choose from 4 cleaning modes and view a detailed 3D map of your home. You can select the suction power and cleaning intensity, create “no-go zones” and virtual walls and specify where to vacuum, mop or keep dry.

1. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Customised by you to suit your own home

Room Customisation

Choose the best cleaning settings for each room. Room customisation in the SmartThings App(1) lets you adjust the suction power and the mop pad cleaning intensity to the level required for different areas.

1. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Next

stop

ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator ftd16_interactive multi feature-product detail-indicator

Remotely control it anytime, anywhere

Voice Recognition (Mobile)

Clean your home with your voice – wherever you are! Using Samsung Bixby(1) embedded in the robot or via a smartphone or smartwatch(2), you can tell Jet Bot Combo what to do. You can schedule when it works, start and stop cleaning, instruct it where to clean, empty its dustbin, locate its position and more(3).

1 Bixby may not recognise certain languages and accents/dialects. A Samsung account log-in and data network connection (Wi-Fi or data network) are required 2. This feature is only available on certain Samsung smartwatches that are connected to the Galaxy Wearable App and when using the SmartThings App on the smartwatches to control devices. Supported products: Gear S3/S4/Sports, Watch, Watch Active/Active2, Watch3, Watch4, Watch4 Classic, Watch5, Watch5 Pro, Watch6, Watch6 Classic. 3. Requires SmartThings App. Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

What's in the box