Replace the water filter in your Samsung refrigerator

Samsung refrigerator and water filter replacement

Ensuring your Samsung refrigerator dispenses clean, fresh water involves using a clean water filter. We recommend replacing the water filter every six months for optimal performance. The built-in water filter light on your refrigerator serves as a convenient reminder for this replacement schedule and should be reset each time you install a new filter. For guaranteed quality and compatibility, use only Samsung Genuine Water Filters available on our official website.

Important: Avoid third-party water filters as they may cause leaks and potentially damage your refrigerator.

Identifying the correct water filter

Samsung refrigerators are compatible with three specific water filter models. To select the right one:

  • Find your filter's location in your refrigerator (varies by model) – consult your user manual if needed.

  • Check the model number on the existing filter to identify whether you need a HAF-CIN, HAF-QIN, or HAFCU1 filter.

Water filter model HAF-CIN
Water filter model HAF-QIN
Water filter model HAFCU1

Replacing the water filter

Follow these simple steps to replace your water filter, which should take just a few minutes:

HAF-CIN and HAF-QIN filter types:

  1. Turn off the water supply.

  2. Locate the filter, open the cover, and rotate the old filter counterclockwise to unlock and remove it.

  3. Remove the protection cap from the new filter, insert it into the housing, and turn clockwise until locked into place. Align the lock symbol with the indicator line.

HAFCU1 filter types:

  1. Turn off the water supply.

  2. Locate the filter and twist it left to unlock and remove.

    Person removing the old filter
  3. Insert the new filter into the housing and twist right to secure it. Align the notch with the arrow on the housing.

    Align notch and arrow on the filter
  4. After installation, dispense several gallons of water to clear out any impurities or air, then reset the water filter indicator light on your fridge.

Resetting the water filter light

The indicator light functions on a six-month timer, signaling when it's time for a filter change. If the water dispensing speed changes significantly with and without the filter, consider replacing it regardless of the light's status. Here's how to reset the indicator based on your refrigerator model:

  • Standard models: Find the Filter Reset button on the control panel. Press and hold for three seconds.

  • Family Hub models: Go to Apps > Fridge Manager > Fridge Settings > Water Filter, then tap Reset.

  • Models with arrow buttons: Use arrows to navigate to More Options > Filter Reset.

  • Specific models (RF4289 and RSG309): Navigate to Settings > Water Filter, then hold Reset until the status changes.

Water filter standards

Samsung water filters meet NSF/ANSI standards 42, 53, and 401, ensuring a reduction in various contaminants from your drinking water, including chlorine, lead, mercury, and emerging contaminants like pharmaceuticals.

Troubleshooting

If you encounter issues installing a new water filter, refer to our troubleshooting guide for assistance or contact Samsung support for further help.

Other answers that might help

samsung logo action minus
Contact us
We're here for you.
Was this content helpful?
We're here for you

Contact Samsung Support

Contact us online through chat and get support from an expert on your computer, mobile device or tablet. Support is also available on your mobile device through the Samsung Members App.
Table of contents