Use the Dial Controller on the Hi-Fi Speaker

Charge the Dial Controller

The first thing you’ll need to do is charge the dial controller. Once it’s fully charged, you can connect it to the Wireless Audio speaker.

To charge the dial controller, remove the bottom cover from the dial controller and connect the small end of a micro USB cable (not included) to it. Connect the other end of the USB cable to a power source. Charge the dial controller until the LED light turns white, which means the dial controller is fully charged.

Note: It takes approximately 3 hours to fully charge the battery.

Connect the Dial Controller to the Speaker

Before you begin, remove the cover from the bottom of the dial controller and the back of the speaker. Also, make sure the dial controller is fully charged.

Press the CONNECT button on the back of the speaker, and then press the CONNECT button on the bottom of the Dial Controller. You should hear the speaker say "Pairing is complete". Don't forget to reattach the covers.

Use the Dial Controller

All the controls you need are literally at your fingertips with the dial controller. Play or pause a song, skip to the next, or even call your phone’s voice assistant to have it done for you. Learn how to use the dial controller below.

Play/Pause: Press the touchpad once to play or pause a song.
Skip tracks: Press the touchpad twice to play the next song.
Activate voice recognition: Press and hold for 2 seconds to activate the voice recognition service on your phone (Bixby, Alexa, Google Assistant, etc.).
Adjust the volume: Turn the volume wheel clockwise to increase the volume, and counterclockwise to decrease.

Tips for Using the Dial Controller

If there is no response when you press a button or the touch wheel area, they may be exposed to static. Unplug the speaker and plug it back in.

If the dial controller doesn’t work, press Reset on the bottom and try again. If still having an issue, it may be due to one of the following:

The dial controller battery is low. Charge the battery and try again.
The dial controller is out of operating range. Move the dial controller closer to the speaker.
The dial controller and the speaker may not be connected properly. Follow the steps above to reconnect.