Set up your Odyssey Ark Gaming Screen

To assemble the stand, first place the Gaming Screen face down on a flat surface while still in the top and bottom foam.

Push the stand’s neck into the main body of the Gaming Screen, and then turn the stand neck 90° clockwise. Tightly fasten the connecting screw at the center of the stand neck.

Turn the stand neck 180° in the opposite direction, and then tighten the connecting screw at the center to secure it.

Next, insert the stand base onto the stand neck and make sure it is firmly connected.

Tighten the connecting screws at the bottom of the stand base.

Lift the product into an upright position and adjust it as desired.

Finally, using the One Connect cable, connect the end that says TV to the back of the Gaming Screen. You can tidy the cable up by pushing it into the groove on the back of the Gaming Screen. Run the cable through the cable guide on the stand and then plug the opposite end into the One Connect box. Then, connect the power cord to the One Connect box and plug it into the wall. Attach the rear cover to the Gaming Screen to cover the One Connect cord and the ports. Press the Power button on the back of your Odyssey Ark Gaming Screen to turn it on. Now, you’re good to go!