No sound from wired headphone on Galaxy phone or tablet

There are several possible factors why sound is not playing from your headphones. It could be as simple as the volume is too low, or your headphones may be damaged. Use our guide to help pinpoint the issue and get back into your groove once more.

No sound from wired headphone on Galaxy phone or tablet

Checkpoint

Issues with wired headphones on your Galaxy phone or tablet

Note

These instructions are for issues with a built-in headphone jack. If you're using a USB headset or adapter, these steps will also be helpful, but you may need to contact the manufacturer for further troubleshooting. When using dual adapters to charge and listen to audio at the same time, the adapter may overheat and cause issues. Use only Samsung adapters and accessories.

Determine if the issue is with the headphones.

Try another set of headphones on your phone or tablet, or try your current headphones with another device.

Not all features of USB-C headsets may be supported on all devices.

Remove all accessories and restart your phone or tablet.

Make sure there isn't anything that may interfere with plugging in the headphones. Remove the headphones and connected accessories such as cases, charms, or skins. Once you have removed everything, restart your phone or tablet.

If you are using a third-party USB-C adapter that allows you to use headphones while charging a device without a headphone jack, remove the adapter, and then connect the headphones directly to the phone or tablet.

Inspect your headphones for damage.

Take a look at the connector on your headphones and make sure it's not bent or broken, and that the cable is not damaged or showing any exposed wires.

Check the headphone jack and volume buttons on the phone or tablet.

Use the Volume up and Volume down buttons to make sure they're working. You should also inspect the headphone jack on the phone or tablet with a flashlight and make sure there are no debris or bent pins.

If the pins are bent, service is required. Please visit the Support Center to request service.

Check for software updates.

Check if there are any software updates for your phone or tablet by navigating to Settings, and then tapping Software update or System updates. If an update is available, install it by following the on-screen prompts.

Request service.

If you still have issues with your wired headphones, please visit a Samsung walk-in service center or you can schedule a repair service online.

+INFO

Cargando...

Did this resolve your issue?

If this didn’t resolve your issue, please click on “No” for more help.

Yes No

We’re happy to hear that your problem has been resolved.

Perform a sound test for the headphones

Adjust the volume.

Make sure the media volume is not set to mute. When muted, the speaker icon will be gray and crossed out.

There are two ways to adjust the volume:

The volume buttons on the side of your device: Press the Volume up and Volume down buttons on the side of your phone or tablet to adjust the volume.
The media volume sliders on your screen: Press the Volume up and Volume down buttons on the side of your phone or tablet, and then tap the three dots at the top of the volume window. Then, touch and drag the sliders to adjust the volume levels.

If the volume buttons appear stuck or do not work, service is required. Please visit the Support Center to request service.

Play some audio.

Open your favorite music or video app and play some audio. Plug your headphones in and listen for sound.

If you have sound only from one earbud, this may indicate that the headphones need to be replaced. Try another audio clip and make sure it's in stereo, not mono. When mono audio is played, it's normal for only one earbud to work. Most music apps play their tracks in stereo.
If you don't have any sound, continue to the next section.

Did this resolve your issue?

If this didn’t resolve your issue, please click on “No” for more help.

Yes No

We’re happy to hear that your problem has been resolved.

Check the liquid damage indicator on the phone or tablet

Eject the card tray.

Power off your phone or tablet, and insert the ejector tool into the small hole next to the SIM/MicroSD tray. This will eject the tray.

Keep in mind that the location of the SIM/MicroSD tray will vary depending on the device.

Inspect the SIM/MicroSD slot.

Shine your flashlight into the SIM/MicroSD slot. If the device has been exposed to moisture, the LDI will be solid pink, purple, or red. Service is required.

If the device has not been exposed to moisture, the LDI will be solid white or solid white with pink or purple Xs.

Normal LDIs

Close up of LDI colored solid white with pink Xs

An LDI exposed to liquid

Close up of LDI colored solid pink

Request service.

If your phone or tablet has been exposed to liquid, it will need repairs. Physical damage is not covered under the Samsung Limited Warranty, but you can still set up a service appointment. For service options, check out the Support Center.

Did this resolve your issue?

If this didn’t resolve your issue, please click on “No” for more help.

Yes No

We’re happy to hear that your problem has been resolved.

Boot the device into Safe mode

Note

Certain downloaded apps can make your phone or tablet freeze, crash, or lag. Some apps can even affect camera functionality, cause audio issues, and affect network connectivity.

Using Safe mode disables all downloaded apps and loads only the original software that came with your phone or tablet, allowing you to determine if the issue is caused by an app or with the phone or tablet.

If the issues do not appear while in Safe mode, the problem is caused by a downloaded app, and it should be uninstalled.

Reboot the phone or tablet in Safe mode.

First, open the Power menu:

On devices with a regular Power button, press and hold the Power button until the Power menu is displayed.
On devices without a dedicated power button, swipe down with two fingers from the top of the screen to open Quick settings. Tap the Power icon at the top of the screen.

Touch and hold Power off until the Safe mode icon is displayed. Tap Safe mode to start your device in Safe mode. If you've entered Safe mode successfully, you'll see Safe mode displayed at the bottom of the screen.

Safe mode option with a description

Check if the phone or tablet is still having the same problem.

Use the phone or tablet normally to see if the issue has been resolved. If the phone or tablet is operating normally, a recently installed app was most likely causing the issue.

If the issue is gone in Safe mode: One of your recently downloaded apps was likely the cause of the problem. Proceed to Step 4.
If the issue still exists: Downloaded apps may not be the cause of the problem. You may need to reset the phone or tablet to the factory setting.

Uninstall apps.

One by one, uninstall any apps you downloaded just before your phone or tablet began having the issue.

After uninstalling each app, restart the phone or tablet and check if it is functioning normally.

After you uninstall the app that caused the issue, you can reinstall the other safe apps you just deleted.

Reboot the phone or tablet normally.

First, open the Power menu:

On devices with a regular Power button, press and hold the Power button until the Power menu is displayed.
On devices without a dedicated Power button, swipe down with two fingers from the top of the screen to open Quick settings. Tap the Power icon at the top of the screen.

Tap Power off to turn off the device. Wait until the phone or tablet completely turns off, and then press the Power button again to turn it on. See if the issue has been resolved.

Did this resolve your issue?

If this didn’t resolve your issue, please click on “No” for more help.

Yes No

We’re happy to hear that your problem has been resolved.

Perform a factory data reset on your phone or tablet

Warning

You may need your Samsung account password or Lock screen password when resetting your phone or tablet. All your data will be erased. However, before resetting your device, you can use Smart Switch or a cloud account to back up your data onto an SD card or USB drive. If you have encrypted your SD card, it must be decrypted before resetting your device.

Before you reset the phone or tablet.

Make sure to back up your phone or tablet. All data and settings will be erased.
Write down the username and password for the account that you used to back up your data.
We recommend having your phone or tablet plugged into the wall charger during the reset process because it may take up to an hour.
If you have encrypted the SD Card inserted in to your phone or tablet, make sure to decrypt it before the reset. Navigate to Settings, search for and select SD, and then tap Decrypt SD card.

Navigate to Settings. Search for and select Factory data reset. Tap Factory data reset again, and then tap Reset. Follow the on-screen prompts to complete the reset. You may need to enter your Samsung account password or Lock screen password. The phone or tablet will reboot.

When the phone or tablet reboots, it will have its original factory settings. Now you will need to go through the initial setup to finish setting up the phone or tablet. The phone may require you to enter your Samsung or Google account information to complete the setup.

Before installing any apps, make sure that your phone or tablet is functioning normally.

If you are still encountering any issues, please visit a Samsung walk-in service center or you can schedule a repair service online.

Note

If you are still experiencing network service issues with calling, SMS or MMS messages, network signals, mobile data, or hotspots after resetting the device, you may need to contact your carrier.