Is your standby light on, off, or blinking?
TV’s red standby light is on
TV’s red standby light is off
TV’s red standby light is blinking
TV’s red standby light is on
Note
It is normal for the red standby light to be lit when the TV is turned off (as long as it is plugged in and receiving power). But if the TV still won't turn, the only thing left to rule out is the remote.
1
Press the Power button on the remote.
If the TV does not turn on, but the red standby light is lit, then there could be an issue with the remote. Continue troubleshooting to determine if the issue is with the remote or the TV.
Press the Power button on the remote.
If the TV does not turn on, but the red standby light is lit, then there could be an issue with the remote. Continue troubleshooting to determine if the issue is with the remote or the TV.
2
Press the Power button located on the TV itself.
The Power button's location varies depending on your TV's model. If you are not sure where it is located, see your user manual.
- If the TV turns on with the TV's physical button, then your remote is experiencing a problem. Check out our guide for troubleshooting the remote.
- If the TV will not turn on with the TV's physical button or the remote, then continue to the next step.
Press the Power button located on the TV itself.
The Power button's location varies depending on your TV's model. If you are not sure where it is located, see your user manual.
- If the TV turns on with the TV's physical button, then your remote is experiencing a problem. Check out our guide for troubleshooting the remote.
- If the TV will not turn on with the TV's physical button or the remote, then continue to the next step.
3
Request service for your TV.
If your TV is receiving power (indicated by the red standby light being lit) but will not turn on with either the remote or the physical button on the TV, then service is needed. Visit our
Support Center to request service.
Request service for your TV.
If your TV is receiving power (indicated by the red standby light being lit) but will not turn on with either the remote or the physical button on the TV, then service is needed. Visit our
Support Center to request service.
TV’s red standby light is off
Note
When the red standby light is off, the TV either doesn't have power, or it's turned on and the screen is just black. The red light turns off whenever the TV is powered on.
1
Without using the remote, press any button on your TV except the Power button.
Note: Some TV models have a single button control. For information on where the button is located, see your user manual.
Most newer TVs have buttons on the back right side. Without using the remote, press any button except the Power button. If anything appears on the screen, this confirms your TV is on. You can continue troubleshooting using our TV has no picture or a black screen guide.
If the TV's controls cause something to appear on the screen but the remote doesn't, then make sure to also troubleshoot your remote.
Without using the remote, press any button on your TV except the Power button.
Note: Some TV models have a single button control. For information on where the button is located, see your user manual.
Most newer TVs have buttons on the back right side. Without using the remote, press any button except the Power button. If anything appears on the screen, this confirms your TV is on. You can continue troubleshooting using our TV has no picture or a black screen guide.
If the TV's controls cause something to appear on the screen but the remote doesn't, then make sure to also troubleshoot your remote.
2
Unplug the TV for 30 seconds.
The next thing to rule out is a power issue. Unplug the TV and leave it unplugged for 30 seconds.
Unplug the TV for 30 seconds.
The next thing to rule out is a power issue. Unplug the TV and leave it unplugged for 30 seconds.
3
Plug the TV into a working outlet.
Next, plug the TV back in, using an outlet you know works (you can test the outlet with another device, like a lamp).
If the red standby light comes on (and doesn't flash or blink), your TV is receiving power and will probably turn on now. This means there is an issue with the original outlet, or the surge protector if you were using one.
If the TV still doesn’t turn on even though the red standby light is now on, continue troubleshooting using the steps in the first section of this article.
Plug the TV into a working outlet.
Next, plug the TV back in, using an outlet you know works (you can test the outlet with another device, like a lamp).
If the red standby light comes on (and doesn't flash or blink), your TV is receiving power and will probably turn on now. This means there is an issue with the original outlet, or the surge protector if you were using one.
If the TV still doesn’t turn on even though the red standby light is now on, continue troubleshooting using the steps in the first section of this article.
4
Request service if the standby light is still off.
If the standby light never comes on after trying a working outlet, and the TV will not turn on, please contact
Samsung Support to request service.
Request service if the standby light is still off.
If the standby light never comes on after trying a working outlet, and the TV will not turn on, please contact
Samsung Support to request service.
TV’s red standby light is blinking
1
Unplug the TV for 30 seconds.
Unplug the TV and leave it unplugged for 30 seconds.
Unplug the TV for 30 seconds.
Unplug the TV and leave it unplugged for 30 seconds.
2
Plug the TV into a working outlet.
Next, plug the TV back in, using an outlet you know works (you can test the outlet with another device, like a lamp). Do not use a surge protector, as they may eventually wear out and stop providing the necessary voltage for your TV.
- If the red standby light comes on (and doesn't flash or blink), your TV is receiving power and will probably turn on now. This means there is an issue with the original outlet, or the surge protector if you were using one.
- If the TV still doesn't turn on even though the red standby light is now on, continue troubleshooting using the steps in the first section of this article.
Plug the TV into a working outlet.
Next, plug the TV back in, using an outlet you know works (you can test the outlet with another device, like a lamp). Do not use a surge protector, as they may eventually wear out and stop providing the necessary voltage for your TV.
- If the red standby light comes on (and doesn't flash or blink), your TV is receiving power and will probably turn on now. This means there is an issue with the original outlet, or the surge protector if you were using one.
- If the TV still doesn't turn on even though the red standby light is now on, continue troubleshooting using the steps in the first section of this article.
3
Set up service for the TV.
If the TV still won't turn on and the red standby light is still blinking, this is a sign that something is wrong with your TV. Visit our
Support Center to request service.
Set up service for the TV.
If the TV still won't turn on and the red standby light is still blinking, this is a sign that something is wrong with your TV. Visit our
Support Center to request service.
