Air Command is not working on Samsung Galaxy phone or tablet

There are several possible reasons why the Air command shortcut menu may not display on your Galaxy phone or tablet. It can be the result of a physical issue, like damage to your S Pen, or an issue with your device's software. You can reboot the phone or tablet, perform a software update, or boot into Safe mode to solve the problem.

Galaxy S24 Ultra showing the Air Command menu with an S Pen

Air Command is not working on Samsung Galaxy phone or tablet

Checkpoint

Check Air command settings

Enable the Air command icon.

The Air command menu will not appear on the Home screen if its option has been turned off. You can fix this by navigating to Settings, then tapping Advanced features, and then tapping S Pen. Tap Air command, and then tap the switch next to Show Air command icon.

Check Air command shortcuts and apps.

If shortcuts and apps have been removed from Air command, there will be nothing to select in the Air command menu. From the Air command settings menu, tap Shortcuts, and then select your desired shortcuts or apps on the left side of the screen. Your selections will appear on the right side of the screen. Tap Back when you’re finished.

Shortcuts highlighted in Air command settings

Enable or disable the Pen button when opening Air command.

You can also open the Air command menu by hovering over the screen with the S Pen and pressing the Pen button. From the Air command settings menu, tap the switch next to Open Air command with Pen button. Tap the switch again to disable the option.

If this option is disabled, you will need to open the Air command menu by tapping the Air command icon instead.

+INFO

Cargando...

Did this resolve your issue?

If this didn’t resolve your issue, please click on “No” for more help.

Yes No

We’re happy to hear that your problem has been resolved.

Check the S Pen

Enable multiple S Pens.

If you are using an S Pen Pro or S Pen Creator Edition with a device that comes with an S Pen, remove the S Pen from the device. If the S Pen Pro or S Pen Creator Edition now works, you can enable multiple S Pens so your Galaxy device will always be ready for either S Pen.

Navigate to and open Settings, then tap Advanced features, and then tap S Pen. Tap More S Pen settings, and then tap the switch next to Allow multiple S Pens to turn it on.

Check if the S Pen has been damaged.

S Pen button stuck vs normal

If the button on the S Pen is pushed below the surface, then the S Pen is damaged and must be replaced. You can find a new one on our website.

Did this resolve your issue?

If this didn’t resolve your issue, please click on “No” for more help.

Yes No

We’re happy to hear that your problem has been resolved.

How to update your Galaxy phone or tablet

Note

The phone or tablet will show the last date that it checked for updates. To download an update, you must be connected to the internet.

Download updates manually.

On your device, navigate to and open Settings.
Swipe to and tap Software update or System updates. It will vary between models.
Tap Download and install or Check for software updates. If an update is available it will begin downloading, though you may need to tap Download now on some devices.
When the download is complete, follow the on-screen instructions to install the update.

You can also check for updates using Smart Switch.

Make sure your device has enough space.

Make sure the phone or tablet is connected to the internet and charged to at least 50% before installing a software update.
Some carriers require a Wi-Fi network connection and will not allow you to update using mobile data.
If an error occurs during a software update and your phone or tablet keeps restarting, learn how to get out of a boot loop.
If your phone or tablet doesn't have enough storage space, you can clean up your storage with Device care. You can also back up extra files using Smart Switch or your Samsung or Google account.

Check your phone or tablet after the update.

If you were having issues before the software update, use the phone or tablet normally to check if the problem has been solved.

Did this resolve your issue?

If this didn’t resolve your issue, please click on “No” for more help.

Yes No

We’re happy to hear that your problem has been resolved.

Boot the device into Safe mode

Note

Certain downloaded apps can make your phone or tablet freeze, crash, or lag. Some apps can even affect camera functionality, cause audio issues, and affect network connectivity.

Using Safe mode disables all downloaded apps and loads only the original software that came with your phone or tablet, allowing you to determine if the issue is caused by an app or with the phone or tablet.

If the issues do not appear while in Safe mode, the problem is caused by a downloaded app, and it should be uninstalled.

Reboot the phone or tablet in Safe mode.

First, open the Power menu:

On devices with a regular Power button, press and hold the Power button until the Power menu is displayed.
On devices without a dedicated power button, swipe down with two fingers from the top of the screen to open Quick settings. Tap the Power icon at the top of the screen.

Touch and hold Power off until the Safe mode icon is displayed. Tap Safe mode to start your device in Safe mode. If you've entered Safe mode successfully, you'll see Safe mode displayed at the bottom of the screen.

Safe mode option with a description

Check if the phone or tablet is still having the same problem.

Use the phone or tablet normally to see if the issue has been resolved. If the phone or tablet is operating normally, a recently installed app was most likely causing the issue.

If the issue is gone in Safe mode: One of your recently downloaded apps was likely the cause of the problem. Proceed to Step 4.
If the issue still exists: Downloaded apps may not be the cause of the problem. You may need to reset the phone or tablet to the factory setting.

Uninstall apps.

One by one, uninstall any apps you downloaded just before your phone or tablet began having the issue.

After uninstalling each app, restart the phone or tablet and check if it is functioning normally.

After you uninstall the app that caused the issue, you can reinstall the other safe apps you just deleted.

Reboot the phone or tablet normally.

First, open the Power menu:

On devices with a regular Power button, press and hold the Power button until the Power menu is displayed.
On devices without a dedicated Power button, swipe down with two fingers from the top of the screen to open Quick settings. Tap the Power icon at the top of the screen.

Tap Power off to turn off the device. Wait until the phone or tablet completely turns off, and then press the Power button again to turn it on. See if the issue has been resolved.

Did this resolve your issue?

If this didn’t resolve your issue, please click on “No” for more help.

Yes No

We’re happy to hear that your problem has been resolved.

Perform a factory data reset on your phone or tablet

Warning

You may need your Samsung account password or Lock screen password when resetting your phone or tablet. All your data will be erased. However, before resetting your device, you can use Smart Switch or a cloud account to back up your data onto an SD card or USB drive. If you have encrypted your SD card, it must be decrypted before resetting your device.

Prepare your phone or tablet for reset.

Make sure to back up your phone or tablet. All data and settings will be erased.
Write down the username and password for the account that you used to back up your data.
We recommend having your phone or tablet plugged into the wall charger during the reset process because it may take up to an hour.
If you have encrypted the SD Card inserted in to your phone or tablet, make sure to decrypt it before the reset. Navigate to Settings, search for and select SD, and then tap Decrypt SD card.

Perform the reset.

Navigate to Settings. Search for and select Factory data reset. Tap Factory data reset again, and then tap Reset. Follow the on-screen prompts to complete the reset. You may need to enter your Samsung account password or Lock screen password. The phone or tablet will reboot.

Set up the device.

When the phone or tablet reboots, it will have its original factory settings. Now you will need to go through the initial setup to finish setting up the phone or tablet. The phone may require you to enter your Samsung or Google account information to complete the setup.

Test the device.

Before installing any apps, make sure that your phone or tablet is functioning normally.

If you are still encountering any issues, please visit a Samsung walk-in service center or you can schedule a repair service online.

Note

If you are still experiencing network service issues with calling, SMS or MMS messages, network signals, mobile data, or hotspots after resetting the device, you may need to contact your carrier.